How to Assembly the Scribbles Twin Bunk Bed


Do not allow children under 6 years of age to use the upper bunk.
Prohibit more than one person on upper bunk.
SIZE OF MATTRESS AND FOUNDATION:
Use only mattress, which is 37 1/2″ – 38 1/2″ width and 74″-75″ long on upper bunk (twin size.)
Ensure that the thickness of the mattress does not exceed 6″ and that the mattress surface is at least 5″ (127mm) below upper edge of guardrails.

Parts and Hardware

Parts and Hardware

Assembly Instructions

2A Fit Wood Dowels to the Bottom Stretchers.
2B Attach Bottom Stretchers to Lower Frame.
Using 90mm Bolts and Barrel Nuts provided with the Lower Frame, attach the Lower Frame to the Bottom Stretchers as shown.
Assembly Instructions
Bolt and Barrel Nut Assembly.
Do not force the Bolt as you may strip the thread. Be sure the thread is properly started. Be sure the holes are free of wood chips and saw dust.

3A Fit the Slats between the Stretchers.
Lay the Slats inside the Stretchers as shown below, and Bolts in place with 32mm threaded Wood Bolts (total 4 Bolts).
3B Fix the Remaining Slats with screws.
Use the 30mm Wood Screws to fix the remaining slats to the Stretchers (total 18 screws). An electric screwdriver will make this much easier.
Assembly Instructions

4A Attach the Stretchers and Rear Guard Rail to the Upper Bunk.
Tap Wooden Dowels into the ends of the Stretchers and Rear Guard Rail. Using 90mm Bolts and Barrel Nuts, attach these to the Upper Bunk, carefully noting Left and Right hand sides.
Assembly Instructions
Bolt and Barrel Nut Assembly.
Do not force the Bolt as you may strip the thread. Be sure the thread is properly started.
Be sure the holes are free of wood chips
and saw dust.

5A Attach Front Guard Rail to the Upper Bunk.
Tap Wooden Dowels into the ends of the Front Guard Rail use the 90mm Bolts and Barrel Nuts fix it in place. The Front Guard Rail attaches to the Stretcher using the 30mm Bolts.
Assembly Instructions

6A Bolt the Slats to the Stretchers.
Lay the Slats inside the Stretchers as shown below, and Bolt in place with the 32mm Threaded Wood Bolts (total 4 Bolts).
6B Fix the Remaining Slats with screws.
Use the 30mm Wood Screws to fix the remaining slats to the Stretchers (total 18 screws). An electric screwdriver will make this much easier.
Assembly Instructions

7A Fit the Upper Bunk onto the Lower Bunk.
Fit the Wooden Dowels into the tops of the legs. Carefully lift the Top Bunk onto the Lower Bunk.
7B Fit the Brackets to the Legs.
Use the 60mm Bolts to fix the Brackets to the Legs.
Assembly Instructions

8A Attach the Ladder to the Upper Stretcher.
Finally, hook on the Ladder onto the Upper Strecher. Use the 16mm Wood Screws to fix the Ladder in place.

Please take not of the warnings shown on page one of these instructions, printed on the carton box and on stickers on the Bunk Bed.
Assembly Instructions

Лучший бесплатный антивирус скачать

Leave a Reply

Your email address will not be published. Required fields are marked *